| 1. | Remove the dashboard. |
| 2. | Remove the these items from the dashboard:
|
| 3. | Detach the hooks by pulling both blind covers (A) back, release the hooks (B), then remove the covers. |
| 4. | On both side, detach the clips and release the hooks (A), then remove the tweeters (B) or tweeter grille. Disconnect the tweeter connectors (C). |
| 5. | From the front of the dashboard, detach the harness clips (A, B) |
| 6. | From the back of the dashbord, Detach the harness clips (A) from both sides. LHD is shown, RHD is symmetrical. Driver's side: Passenger's side: |
| 7. | On passenger's side, disconnect the glove box light bulb socket (B), and detach the connectors (C). |
| 8. | Remove the screws (A, B) securing the dashboard (C) and steering hanger beam (D), and detach the clips (E), then separate the dashboard and steering hanger beam. |
| 9. | Install the beam in the reverse order of removal, and note these items:
|