| 1. | Adjust the steering column upward. |
| 2. | Remove the screw (B). Starting at the left lower corner working toward the right, gently pull out the bottom to detach four clips (C) and a hook (D). Disconnect the VSA switch connector (E), and if equipped, headlight adjuster switch connector (F). |
| 3. | While pulling the left of the dashboard lower cover (A) back, pry the clips (B, C) nearest the center console with a flat-tip screwdriver, then remove the cover. |
| 4. | Install the cover in the reverse order of removal, and make sure the connector is plugged in properly. |