| 1. | Make sure you have the anti-theft code for the radio and the navigation system, then write down the frequencies for the radio's preset buttons. |
| 2. | Disconnect the battery negative cable. |
| 3. | Remove the left front door sill trim and left kick panel. |
| 4. | Disconnect the 6P connector from the driver's under-dash fuse/relay box. |
| 5. | Check for continuity between the terminals in each switch position according to the table. |
| 6. | If the continuity checks do not agree with the table, replace the steering lock. |
| 7. | After reconnecting the battery, enter the anti-theft code for the radio and the navigation system, then enter the customer's radio station presets. |
| 8. | Do the engine idle learn procedure and the power window control unit reset procedure. |