Power Windows Descriptions

Key Cylinder Operation


With the key inserted in the driver's door key cylinder, turn the key within 10 second time (same as previous direction) to operate the windows:


Keyless Operation


By pressing and holding the UNLOCK button of the keyles transmitter a second time, the windows opening operation will start.

Anti-trap Power Window Operation


The driver's window will stop and automatically open if you pinch your hand or something during auto-up operation.
The system is composed of the power window master switch, the door multiplex control unit and the driver's window motor.

The power window motor incorporates a pulser which generates pulses during the motor's operation and sends the pulses to the door multiplex control unit. As soon as the door multiplex control unit detects no pulses from the pulser, the control unit makes the power window motor stop and reverse.

Resetting the power window


Resetting the power window is required after performing repairs to the power windows system or if the auto function fails to operate.


1.Turn the ignition switch ON (II).

2.Move the driver's window all the way down by using the driver's switch; when the window reaches the bottom, hold the driver's window switch in the DOWN position for 2 seconds.

3.Move the driver's window all the way up without stopping by using the driver's switch, when the window reaches the top, hold the driver's window switch in the UP position for 2 seconds.

If the window still does not work in AUTO, go to multiplex integrated control system test mode A.