STEERING LINKAGE > REASSEMBLY

1. INSTALL STEERING RACK PISTON RING

2. INSTALL POWER STEERING RACK

3. INSTALL CYLINDER END STOPPER

4. TEST AIR TIGHTNESS

5. INSTALL POWER STEERING CONTROL VALVE

6. INSTALL RACK GUIDE

7. ADJUST TOTAL PRELOAD

8. INSPECT POWER STEERING RACK

9. INSTALL STEERING RACK END SUB-ASSEMBLY

10. INSTALL STEERING RACK BOOT LH

11. INSTALL STEERING RACK BOOT RH

12. INSTALL STEERING RACK BOOT CLAMP LH

13. INSTALL STEERING RACK BOOT CLAMP RH

14. INSTALL STEERING RACK BOOT CLIP LH

15. INSTALL STEERING RACK BOOT CLIP RH

16. INSTALL POWER STEERING GEAR ASSEMBLY

17. INSTALL STEERING TURN PRESSURE TUBE (for 2WD)

18. INSTALL STEERING TURN PRESSURE TUBE (for 4WD)