ENGINE OIL COOLER > INSTALLATION

1. INSTALL OIL COOLER ASSEMBLY

2. INSTALL OIL COOLER COVER SUB-ASSEMBLY

3. INSTALL COMMON RAIL ASSEMBLY

4. INSTALL FUEL SUPPLY PUMP ASSEMBLY

5. INSTALL STARTER ASSEMBLY

6. INSTALL OIL FILTER SUB-ASSEMBLY

7. INSTALL INJECTION PIPE

8. INSTALL FUEL INLET PIPE SUB-ASSEMBLY

9. INSTALL OIL LEVEL GAUGE SUB-ASSEMBLY

10. INSTALL MANIFOLD STAY

11. ADD FUEL

12. TIGHTEN FUEL TANK CAP ASSEMBLY

13. ADD ENGINE OIL

14. BLEED AIR FROM FUEL SYSTEM

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

16. PERFORM INITIALIZE

17. CHECK FOR FUEL LEAKS

18. CHECK FOR ENGINE OIL LEAKS

19. INSTALL NO. 2 ENGINE UNDER COVER (for 4WD)

20. INSTALL NO. 1 ENGINE UNDER COVER (for 4WD)