FUEL LID LOCK CONTROL > INSTALLATION

1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER

2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

3. INSTALL REAR WHEEL HOUSE LH LINER

4. INSTALL REAR NO. 1 WHEEL OPENING EXTENSION LH (w/ Rear Wheel Opening Extension)

5. INSTALL FLOOR CARPET ASSEMBLY FRONT (for RHD)

6. INSTALL QUARTER INSIDE TRIM BOARD LH (for Extra Cab)

7. INSTALL QUARTER TRIM PANEL LOWER LH

8. INSTALL CENTER PILLAR GARNISH LOWER LH (for Double Cab)

9. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY OUTER LH (for Extra Cab)

10. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH

11. INSTALL REAR DOOR SCUFF PLATE LH (for Double Cab)

12. INSTALL COWL SIDE TRIM BOARD LH (for LHD)

13. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

14. INSTALL FRONT DOOR SCUFF PLATE LH

15. INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)

16. INSTALL CONSOLE BOX ASSEMBLY (for RHD)

17. INSTALL BACK PANEL GARNISH LOWER (for Extra Cab)

18. INSTALL REAR SEAT CUSHION ASSEMBLY LH (for Extra Cab)

19. INSTALL REAR SEAT CUSHION ASSEMBLY RH (for Extra Cab)

20. INSTALL REAR SEAT ASSEMBLY (for Double Cab)

21. INSTALL FRONT SEAT ASSEMBLY (for RHD)

22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

23. PERFORM INITIALIZATION