TURBOCHARGER > INSTALLATION

1. CLEAN TURBOCHARGER SUB-ASSEMBLY

2. INSTALL TURBOCHARGER SUB-ASSEMBLY

3. INSTALL TURBINE OUTLET ELBOW

4. INSTALL NO. 1 TURBO WATER HOSE

5. INSTALL NO. 1 TURBO INSULATOR

6. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

7. INSTALL COMPRESSOR INLET ELBOW

8. INSTALL CHARGE AIR COOLER WITH INTAKE AIR CONNECTOR

9. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

10. INSTALL AIR CLEANER ASSEMBLY

11. INSTALL FRONT EXHAUST PIPE ASSEMBLY

12. INSTALL FRONT FENDER APRON SEAL UPPER

13. INSTALL FRONT FENDER SEAL

14. INSTALL FRONT WHEEL RH

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

16. ADD ENGINE COOLANT

17. CHECK FOR ENGINE COOLANT LEAKS

18. CHECK FOR ENGINE OIL LEAKS

19. PERFORM INITIALIZATION