AIR CONDITIONING AND BLOWER UNIT > INSTALLATION

1. INSTALL AIR CONDITIONING AND BLOWER ASSEMBLY

2. INSTALL INSTRUMENT PANEL REINFORCEMENT

3. INSTALL ECM

4. INSTALL STEERING COLUMN ASSEMBLY

5. INSTALL NO. 1 COOLER UNIT DRAIN HOSE

6. INSTALL NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

7. INSTALL NO. 3 HEATER TO REGISTER DUCT

8. INSTALL NO. 1 HEATER TO REGISTER DUCT

9. INSTALL NO. 2 HEATER TO REGISTER DUCT

10. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY LOWER

11. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY UPPER

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

13. PERFORM INITIALIZATION

14. CHECK SRS WARNING LIGHT