FRONT AXLE HUB (for 2WD) > INSTALLATION

1. INSTALL FRONT AXLE HUB INNER BEARING

2. INSTALL FRONT AXLE HUB OIL SEAL

3. INSTALL AXLE HUB TO STEERING KNUCKLE

4. INSTALL FRONT AXLE HUB NUT AND ABS SPEED SENSOR ROTOR OR SPACER

5. INSTALL KNUCKLE GREASE RETAINER CAP

6. INSTALL FRONT AXLE HUB ASSEMBLY

7. INSTALL FRONT SUSPENSION UPPER ARM ASSEMBLY LH

8. INSTALL FRONT SUSPENSION LOWER ARM ASSEMBLY WITH ATTACHMENT LH

9. INSTALL TIE ROD END SUB-ASSEMBLY

10. INSTALL FRONT DISC

11. INSTALL FRONT INSTALL SPEED SENSOR

12. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

13. BLEED AIR FROM BRAKE LINE

14. CHECK BRAKE FLUID LEVEL IN RESERVOIR

15. CHECK FOR BRAKE FLUID LEAKAGE

16. INSTALL FRONT WHEEL

17. CHECK ABS SPEED SENSOR SIGNAL