Rocker Arm Assembly Installation (L15A)

Rocker Arm Assembly Installation

1.	Install the rocker arm assembly (A) with dowel pin (B). NOTE: When reassembling the rocker arms, Install the rocker arm from cam chain side on the rocker shaft.   AB

2.	Tighten each bolts two turns at a time in sequence below. Specified torque: 29 N·m (3.0 kgf·m, 22 lbf·ft)  Apply engine oil to the bolt threads and flange    (3)(4)(2)AAAA(5)(1)

3.	Remove the rubber bands (A) from the intake rocker arms.

4.	Adjust the valve clearance.

5.	Install the cylinder head cover.