| 1. | Write down the frequencies for the radio's preset buttons. Disconnect the negative (-) cable first, then the positive (+) cable from the battery. Remove the battery. |
| 2. | Remove the air cleaner housing. |
| 3. | Remove the battery tray. |
| 4. | Carefully remove the shift cable, select cable, and cable bracket together so as not to bend the cables. |
| 5. | Disconnect the mainshaft speed sensor connector, back-up light switch connector, and reverse lockout solenoid connector. |
| 6. | Remove the bolts (A) and reverse lockout solenoid (B). |
| 7. | Remove the roller (A), the select lock return spring (C), and the select lock cam B. |
| 8. | Install in the reverse order of removal. |
| 9. | Remove the dirt and oil from the sealing surface. Apply liquid gasket (P/N 08C70-K0234M) to the sealing surface. NOTE: If 5 minutes have passed after applying liquid gasket, reapply it and assemble the housings. Allow it to cure at least 20 minutes after assembly before filling the transmission with oil. |
| 10. | Install the reverse lockout solenoid. |
| 11. | Connect the reverse lockout solenoid connector, back-up light switch connector, and mainshaft speed sensor connector. |
| 12. | Install the cable bracket, select cable, and shift cable. |
| 13. | Install the battery tray. |
| 14. | Install the air cleaner housing. |
| 15. | Install the battery. Connect the positive (+) cable first, then the negative (-) cable to the battery. |
| 16. | Do the idle learn procesure. |
| 17. | Enter the anti-theft code for the radio and navigation system, then enter the customer's radio station presets. |
| 18. | Perform the power window control unit reset procedure. |