| DTC B1205: | Climate Control Unit Lost Communication with the Gauge Control Module (VSP/NE messages) |
| DTC B1207: | Climate Control Unit Lost Communication with the Gauge Control Module (ILLUMI messages) |
| 1. | Clear the DTCs using the Honda PGM Tester or HDS. |
| 2. | Turn the ignition switch OFF then ON. |
| 3. | Turn the climate control system on and operate several functions. (A/C on/off, air mix and blend door operations, temperature settings etc.) |
| 4. | Check the DTCs by selecting the DTCs MENU (DTCs) from the Honda PGM Tester or HDS. Is DTC B1205, B1206 and/or B1207 indicated? YES - Go to 5. NO - Intermittent failure, the gauge control module and climate control unit are ok at this time.n |
| 5. | Check the DTCs by selecting the DTCs MENU (DTCs) from the Honda PGM Tester or HDS. Is DTC B1008, B1060 and/or B1061 indicated? YES - Perform the gauge control module input test.n |