| 1. | Make sure you have the anti-theft codes for the radio and the navigation system, then write down the frequencies for the radio's preset buttons. |
| 2. | Disconnect the battery negative cable, then disconnect the positive cable, and wait at least 3 minutes. |
| 3. | Remove the under-hood multi-relay box from the under-hood fuse/relay box. |
| 4. | Remove the screws (A) from the alternator and battery cable terminals. |
| 5. | Remove the two mounting bolts (B) from the under-hood fuse/reley box. |
| 6. | Remove the under cover from the under-hood fuse/reley box. |
| 7. | Disconnect the connectors from the under-hood fuse/reley box. |
| 1. | Connect the connectors to the under-hood fuse/relay box, then install the under-hood fuse/relay box in the reverse order of removal. |
| 2. | Install the removed parts in the reverse order of removal. |
| 3. | Connect the both positive cable and negative cable to the battery. |
| 4. | Do the ECM/PCM idle learn procedure. |
| 5. | Do the power window control unit reset procedure. |
| 6. | Enter the anti-theft codes for the radio and navigation system, then enter the customer's radio station presets. |
| 7. | Confirm that all systems work properly. |