| 1. | Remove the driver's dashboard lower cover. |
| 2. | Push up the lower clips by hand, then push out the driver's side vent (A) by releasing the upper and side tabs (B). |
| 3. | Reinstall the tab portions of the vent first, then push the clip portions into place securely. |
| 1. | Detach the hook of the glove box damper, then lower the glove box. |
| 2. | Carefully insert a flat-tip screwdriver under the clip, and push it up. |
| 3. | Pull out along the edge of the passenger's side vent (A) by hand to release the lower clips and the upper and side tabs (B). Then remove the vent. |
| 4. | Reinstall the tab portions of the vent first, then push the clip portions into place securely. |