- Be careful not to damage the booster surfaces and threads of the booster stud bolts.
- Be careful not to bend or damage the brake lines.
| 1. | Make sure you have the anti-theft codes for the radio and navigation system, then write down the frequencies for the radio's preset buttons. |
| 2. | Disconnect the negative cable from the battery. |
| 3. | Remove the master cylinder. |
| 4. | Disconnect the vacuum hose (A) from the brake booster (B). |
| 5. | Remove the under-hood fuse/relay box cover. |
| 6. | Remove the under-hood fuse/relay box mounting bolt (A), then remove the under-hood fuse/relay box from the body. |
| 7. | Remove the air cleaner assembly (A). |
| 8. | Remove the primary and secondary brake lines from the hose clamp (A). |
| 9. | Remove the clip (A) and the joint pin (B), then disconnect the yoke from the brake pedal. |
| 10. | Remove the brake booster mounting nuts (C). |
| 11. | Remove the brake booster (A) from the engine compartment.
|
| 12. | Install the brake booster in the reverse order of removal, and note these items:
|