17 - Rear Suspension
DESCRIPTION
The rear suspension is link/coil design comprised of:
Suspension components with rubber/urethane
bushings (except stabilizer bar) should be tightened with the full
weight of the vehicle at normal ride height. It is important to have
the springs supporting the full weight of the vehicle when the fasteners
are torqued. This will maintain vehicle ride comfort and prevent premature
bushing wear.
CAUTION:
SPECIFICATIONS
| DESCRIPTION | N·m |
Ft. Lbs. |
In. Lbs. |
|---|---|---|---|
|
Shock Absorber Upper Bolts |
57 |
37 |
— |
|
Shock Absorber Lower Nut |
88 |
65 |
— |
|
Suspension Arm Lower Axle Bracket Nut |
159 |
117 |
— |
|
Suspension Arm Lower Frame Bracket Bolt |
159 |
117 |
— |
|
Suspension Arm Upper Axle Bracket Bolt |
169 |
125 |
— |
|
Suspension Arm Upper Frame Bracket Bolt |
159 |
117 |
— |
|
Stabilizer Bar Retainer Bolts |
70 |
52 |
— |
|
Stabilizer Bar Link Nut/Bolt |
102 |
75 |
— |
|
Stabilizer Bar to Link Nut |
90 |
66 |
— |
|
Track Bar Frame Bracket Nut |
169 |
125 |
— |
|
Track Bar Axle Bracket Bolt |
169 |
125 |
— |