ELECTRONIC CONTROLLED AUTOMATIC TRANSMISSION SYSTEM > TCM Power Source Circuit > Preparation
| Feeler gauge | |
| Cylinder gauge | |
| Vernier calipers | |
| Dial indicator | |
| Micrometer | |
| Straight edge | |
| Torque wrench | |
| Angle gauge | |
| V block | |
| Dial indicator or dial indicator with magnetic base |
| Automatic transmission fluid | ATF TYPE-IV | |
 | 09040-00011 | Hexagon Wrench Set | - |
 | (09043-20100) | Socket Hexagon Wrench 10 | - |