STEERING LINKAGE > REMOVAL > Preparation
 | 09023-12700 | Union Nut Wrench 17mm |
| 09023-12701 | Union Nut Wrench 17mm |
 | 09628-62011 | Boll Joint Puller |
 | 09950-50013 | Puller C Set |
 | (09951-05010) | Hanger 150 |
 | (09952-05010) | Slide Arm |
 | (09953-05020) | Center Bolt 150 |
 | (09954-05021) | Claw No.2 |
| Socket wrench for 27 mm | - |
| Caliper gauge | - |
| Vernier caliper | - |
| Dial indicator | - |
| Feeler gauge | - |
| Micrometer | - |
| Torque wrench | - |
| Item | Capacity | Classification |
| Power steering fluid (total) | 1.0 liters (1.1 US qts, 0.9 lmp. qts) | ATF "DEXRON" II or III |
 | 09025-00010 | Torque Wrench (30 kgf-cm) | - |
 | 09042-00010 | Torx Socket T30 | - |
 | 09905-00012 | Snap Ring No.1 Expander | - |