OIL PUMP > REMOVAL > Preparation
 | 09023-12701 | Union Nut Wrench 17mm |
 | 09032-00100 | Oil Pan Seal Cutter |
 | 09213-58013 | Crankshaft Pully Holding Tool |
 | 09330-00021 | Companion Flange Holding Tool |
 | 09950-50013 | Puller C Set |
 | (09951-05010) | Hanger 150 |
 | (09952-05010) | Slide Arm |
 | (09953-05020) | Center Bolt 150 |
 | (09954-05010) | Claw No.1 |
 | (09954-05021) | Claw No.2 |
| Oil pressure gauge | - |
| Radiator cap tester | - |
| Torque cap tester | - |
| Vernier caliper | - |
| Wooden block | - |
| Precision straightedge | - |
| Item | Capacity | Classification | |
| Oil grade | - | G-DLD1 or API grade CF-4, CF | |
| Drain and refill | with oil filter change | 6.9 liters (7.3 US qts, 6.1 lmp, qts) | - |
| without oil filter change | 6.6 liters (7.0 US qts, 5.8 lmp, qts) | - | |
| Dry fill | 7.4 liters (7.8 US qts, 6.5 lmp, qts) | - | |
 | 09090-04020 | Engine Sling Device | - |
 | 09200-00010 | Engine Adjust Kit | - |
 | 08826-00080 | Seal Packing Black or equivalent (FIPG) | - |
 | 08833-00070 | Adhesive 1324, THREE BOND 1324 or equivalent | - |