MANUAL TRANSMISSION UNIT > REMOVAL > Preparation
 | 09817-16011 | Back-up Light Switch Tool |
 | 09950-40011 | Puller B Set |
 | (09951-04010) | Hanger 150 |
 | (09952-04010) | Slide Arm |
 | (09953-04010) | Center Bolt 100 |
 | (09954-04010) | Arm 25 |
 | (09955-04011) | Claw No.1 |
 | (09958-04011) | Holder |
 | 09950-50013 | Puller C Set |
 | (09951-05010) | Hanger 150 |
 | (09952-05010) | Slide Arm |
 | (09953-05010) | Center Bolt 100 |
 | (09954-05021) | Claw No.2 |
| Cylinder gauge | - |
| Dial indicator or dial indicator with magnetic base | - |
| Feeler gauge | - |
| Micrometer | - |
| Plastic hammer | - |
| Press | - |
| Torque wrench | - |
| Vernier calipers | - |
| Item | Capacity | Classification |
| Manual transmission oil | 2.2 liters (2.3 US qts, 1.9 lmp. qts) | API GL-4 or GL-5 SAE 75W-90 |
 | 09031-00040 | Pin Punch . | - |
 | 09042-00020 | Torx Socket T40 | - |
 | 09905-00012 | Snap Ring No.1 Expander | - |
 | 08826-00090 | Seal Packing 1281, THREE BOND 1281 or equivalent (FIPG) | - |
 | 08833-00080 | Adhesive 1344 THREE BOND 1344 LOCTITE 242 or equivalent | - |