TRANSFER CASE OIL SEAL > REMOVAL > Preparation
 | 09308-00010 | Oil Seal Puller |
 | 09330-00021 | Companion Flange Holding Tool |
 | 09950-40011 | Puller B Set |
 | (09951-04020) | Hanger 200 |
 | (09952-04010) | Slide Arm |
 | (09953-04030) | Center Bolt 200 |
 | (09954-04010) | Arm 25 |
 | (09955-04051) | Claw No.5 |
 | (09957-04010) | Attachment |
 | (09958-04011) | Holder |
| Dial indicator with magnetic base | |
| Micrometer | |
| Plastic-faced hammer | |
| Torque wrench | |
| Vernier caliper |
| Item | Capacity | Classification |
| Transfer oil | 1.0 liters (1.1 US qts, 0.9 lmp. qts) | API GL-4 or GL-5 SAE 75W-90 |
 | 08826-00090 | Seal Packing 1281, THREE BOND 1281 or equivalent (FIPG) | - |