ELECTRONIC CONTROLLED AUTOMATIC TRANSMISSION SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING > Preparation
| Feeler gauge | |
| Cylinder gauge | |
| Vernier calipers | |
| Dial indicator | |
| Micrometer | |
| Straight edge | |
| Torque wrench | |
| Angle gauge | |
| V block | |
| Dial indicator or dial indicator with magnetic base |
| Automatic transmission fluid: Dry fill | 7.2 litter (7.61 US qts, 6.34 lmp.qts) | ATF WS |
| Automatic transmission fluid: Drain and refill | 1.7 litter (1.8 US qts, 1.5 lmp.qts) | ATF WS |
 | 09040-00011 | Hexagon Wrench Set | - |
 | (09043-20100) | Socket Hexagon Wrench 10 | - |
 | 09070-20010 | Moulding Remover | - |
 | (09043-20060) | Socket Hexagon Wrench 6 | - |