2KD-FTV STARTING > SERVICE DATA



Starter
Rated voltage and output power
12 V 2.0 kW
No-load characteristics current
100 A or less at 11.5 V
Glow plug
Resistance
Approx. 0.95 Ω
ECT sensor
Resistance
Approx. 20 °C (68°F)
2.32 to 2.59 kΩ
Approx. 20 °C (68°F)
0.310 to 0.326 kΩ
Starter relay
3 - 5
Specified resistance
10 MΩ or higher
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
Glow relay
3 - 5
Specified resistance
10 MΩ or higher
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
Ignition switch
Tester connection
-
Switch condition
LOCK
Specified condition
10 kΩ or higher
Tester connection
2 (ACC) - 4 (AM1)
Switch condition
ACC
Specified condition
Below 1 Ω
Tester connection
1 (IG1) - 4 (AM1)
2 (ACC) - 4 (AM1)
5 (AM2) - 6 (IG2)
Switch condition
ON
Specified condition
Below 1 Ω
Tester connection
1 (IG1) - 4 (AM1)
2 (ACC) - 4 (AM1)
5 (AM2) - 6 (IG2)
5 (AM2) - 7 (ST2)
Switch condition
START
Specified condition
Below 1 Ω