STOP LIGHT SWITCH > INSPECTION

for Preparation Click here



1. INSPECT STOP LIGHT SWITCH ASSEMBLY


E065594E13

  1. Measure the resistance of the switch.

    Standard:

    Tester Connection
    		Switch Condition
    		Specified Condition
    1 - 2
    		Pin not pushed
    		Below 1 Ω
    3 - 4
    		Pin not pushed
    		10 k Ω or higher
    1 - 2
    		Pin pushed
    		10 k Ω or higher
    3 - 4
    		Pin pushed
    		Below 1 Ω