IGNITION COIL > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE V-BANK COVER


    A112983

  1. Remove the 2 nuts and the V-bank cover.



3. REMOVE AIR CLEANER ASSEMBLY


    A075595

  1. Disconnect the vacuum hose.

  1. Disconnect the MAF meter connector.

  1. Remove the 2 wire harness clamps.



    A075596

  1. Loosen the 2 hose clamps.

  1. Remove the 2 bolts and air cleaner.



4. REMOVE IGNITION COIL ASSEMBLY

  1. Disconnect the connector.



    B012294E02

  1. Remove the bolt and ignition coil.