VACUUM REGULATING VALVE > INSTALLATION

for Preparation Click here



1. INSTALL VACUUM SWITCHING VALVE (for EGR CUT)


A112098

  1. Install the valve with the bolt.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



2. INSTALL VACUUM SWITCHING VALVE BRACKET


    A110298

  1. Install the bracket with the 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the vacuum hoses to the 3 locations.

  1. Connect the 2 connectors.



3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    A110362

  1. Install the cover with the 3 bolts and 2 nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


5. PERFORM INITIALIZATION

  1. Perform initialization (Click here).

    CAUTION:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.