REAR BUMPER (for Step Type) > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR BUMPER PLATE


B089755E01

  1. Using a screwdriver, detach the 13 claws and remove the bumper plate from the bumper bar.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE REAR BUMPER PLATE LH


B089756E01

  1. Using a screwdriver, detach the 7 claws and remove the bumper plate from the bumper bar.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE REAR BUMPER PLATE RH

HINT:
Use the same procedures described for the LH side.