FRONT WASHER MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


B086319

HINT:
This check should be performed with the windshield washer motor and pump installed to the washer jar.

  1. Fill the washer jar with washer fluid.

  1. Connect the battery's positive (+) lead to terminal 1 of the washer motor and pump, and the negative (-) lead to terminal 2.

  1. Check that washer fluid flows from the washer jar.

    OK:
    Washer fluid flows from washer jar.

    If the result is not as specified, replace the washer motor and pump assembly.