CIGARETTE LIGHTER > INSTALLATION



1. INSTALL CIGARETTE LIGHTER ASSEMBLY


    B110252

  1. Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.



2. INSTALL CIGARETTE LIGHTER COVER


B085605E01

  1. Attach the 2 claws to install the cigarette lighter cover.

  1. Connect the connector.



3. INSTALL SWITCH BASE


B084837E03

  1. Connect all connectors.

  1. Attach the 8 claws to install the switch base.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


5. PERFORM INITIALIZATION

  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.