REAR POWER WINDOW SWITCH > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (REAR LH AND REAR RH)


B063163

  1. Measure the resistance of the switch when the switch is operated.

    Standard resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    5 - 4
    2 - 3
    		UP
    		Below 1 Ω
    5 - 4
    2 - 1
    		OFF
    		Below 1 Ω
    5 - 3
    2 - 1
    		DOWN
    		Below 1 Ω

    1. If the result is not as specified, replace the regulator switch assembly.