FRONT PASSENGER SIDE POWER WINDOW SWITCH > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY


B063163

  1. Measure the resistance of the switch when the switch is operated.

    Standard resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    5 - 4
    2 - 3
    		UP
    		Below 1 Ω
    5 - 4
    2 - 1
    		OFF
    		Below 1 Ω
    5 - 3
    2 - 1
    		DOWN
    		Below 1 Ω

    1. If the result is not as specified, replace the regulator switch assembly.