FRONT NO. 2 SPEAKER > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


B085614

  1. Install the speaker with the screw.

  1. Connect the connector.



2. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH


B112664E01

  1. Attach the 2 clips to install the garnish.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION

  1. Perform initialization (Click here ).

    NOTICE:
    Certain systems meed to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.