REAR DOOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT REAR DOOR PANEL SUB-ASSEMBLY LH


  1. Check that the clearance measurements of areas A to I are within the standard range.


    B112860E01


    Standard:

    Area
    		Measurement
    		Area
    		Measurement
    A
    		5.0 +- 1.5 mm (0.197 +- 0.059 in.)
    		E
    		4.6 +- 1.5 mm (0.181 +- 0.059 in.)
    B
    		5.1 +- 1.5 mm (0.201 +- 0.059 in.)
    		F
    		9.1 +- 1.5 mm (0.358 +- 0.059 in.)
    C
    		2.3 +- 1.5 mm (0.091 +- 0.059 in.)
    		G
    		4.3 +- 1.5 mm (0.169 +- 0.059 in.)
    D
    		0.7 +- 1.5 mm (0.028 +- 0.059 in.)
    		H
    		4.4 +- 1.5 mm (0.173 +- 0.059 in.)


    		-
    		-