FRONT DOOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FRONT DOOR PANEL SUB-ASSEMBLY LH


  1. Check that the clearance measurements of areas A to K are within the standard range.


    B112659E01


    Standard:

    Area
    		Measurement
    		Area
    		Measurement
    A
    		5.1 +- 1.5 mm (0.201 +- 0.059 in.)
    		F
    		4.6 +- 1.5 mm (0.201 +- 0.059 in.)
    B
    		3.0 +- 1.5 mm (0.118 +- 0.059 in.)
    		G
    		4.2 +- 1.5 mm (0.165 +- 0.059 in.)
    C
    		5.1 +- 1.5 mm (0.201 +- 0.059 in.)
    		H
    		9.0 +- 1.5 mm (0.354 +- 0.059 in.)
    D
    		2.3 +- 1.5 mm (0.091 +- 0.059 in.)
    		I
    		5.2 +- 1.5 mm (0.205 +- 0.059 in.)
    E
    		4.5 +- 1.5 mm (0.177 +- 0.059 in.)
    		J
    		4.5 +- 1.5 mm (0.177 +- 0.059 in.)