ROOM LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 ROOM LIGHT


    B086333E01

  1. Measure the resistance of the light.

    Standard: 
    Tester Connection
    		Switch Condition
    		Specified Condition
    1 - 2
    		DOOR
    		Below 1 Ω
    1 - 2
    		OFF
    		10 kΩ or higher
    1 - Body ground
    		ON
    		Below 1 Ω
    If the result is not as specified, replace the light assembly.