VENTILATION VALVE > INSPECTION

for Preparation Click here



1. INSPECT VENTILATION VALVE SUB-ASSEMBLY


A111999E03

  1. Install a clean hose to the ventilation valve.



  1. Check the ventilation valve operation.

    1. Blow air into the cylinder head side, and check that air passes through easily.

      CAUTION:
      Do not suck air through the valve. Pertroleum substances inside the valve are hazardous to your health.



      2. A112000E03

    2. Blow air into the intake manifold side, and check that air passes through with difficulty.
      If the result is not as specified, replace the ventilation valve sub-assembly.

  1. Remove the clean hose from the ventilation valve.