INJECTOR DRIVER > INSTALLATION

for Preparation Click here



1. INSTALL INJECTOR DRIVER BRACKET


G038053E01

  1. Install the driver bracket with the 3 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



2. INSTALL INJECTOR DRIVER


G038052E01

  1. Install the injector driver with the 2 bolts.

  1. Connect the 2 connectors.

    Torque:
    12.5 N*m{ 128 kgf*cm , 9 ft.*lbf }



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION

  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.



5. READ REGISTERED DATA

  1. Read the registered data (see page ).