HEADLIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL CLEARANCE LIGHT BULB


B113212

  1. Turn the bulb in the direction indicated by the arrow to install it.



2. INSTALL FRONT TURN SIGNAL LIGHT BULB


B113212

  1. Install the bulb to the socket.

  1. Turn the bulb/socket unit in the direction indicated by the arrow to install it.



3. INSTALL NO. 1 HEADLIGHT BULB


B113210

  1. Release the lock of the set spring and install the bulb.



4. INSTALL HEADLIGHT SOCKET COVER


5. INSTALL HEADLIGHT ASSEMBLY LH


B085001

  1. Connect the connectors and install the headlight.

  1. Install the 3 screws and bolts.



6. INSTALL FRONT BUMPER COVER


B085206E01

  1. Put protective tape under the front fender.

  1. Attach the 4 claws to install the cover.



    B085205E01

  1. Install the 9 clips.



7. INSTALL ENGINE SIDE COVER SUB-ASSEMBLY LH


B112763E02

  1. Install the engine side cover with the 3 bolts and 2 clips.



8. INSTALL ENGINE SIDE COVER SUB-ASSEMBLY RH


9. INSTALL FRONT FENDER LINER LH


B085207E01

  1. Install the fender liner with the 3 clips and screw.



10. INSTALL RADIATOR GRILLE


B108604E01

  1. Push the radiator grille in the direction indicated by the arrow in the illustration. Attach the 5 claws to install the radiator grille.

  1. Install the 2 screws and 2 clips.



11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


12. PERFORM INITIALIZATION

  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.



13. ADJUST HEADLIGHT AIMING

  1. Adjust the headlight aiming (Click here ).