OUTSIDE MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 REAR WHEEL OPENING EXTENSION LH

  1. Attach the 11 clips to install the extension.



  1. Install the 7 screws.


    B086893E01



2. INSTALL NO. 1 REAR WHEEL OPENING EXTENSION RH

  1. Attach the 12 clips to install the extension.



  1. Install the 7 screws.


    B086894E01



3. INSTALL FRONT WHEEL OPENING EXTENSION SUB-ASSEMBLY LH

  1. Attach the 8 clips to install the extension.



    B086096E01

  1. Install the 7 screws.



4. INSTALL FRONT WHEEL OPENING EXTENSION SUB-ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.