THERMOSTAT > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. DRAIN ENGINE COOLANT |
Remove the radiator cap.
Loosen the cylinder block drain cock plug and radiator drain plug, and then drain the coolant.

| 3. DISCONNECT RADIATOR HOSE OUTLET |
Disconnect the hose from the water inlet.
| 4. REMOVE WATER INLET |
![]() |
Remove the power steering pump's connector.
![]() |
Remove the 2 nuts, bolt and inlet.
| 5. REMOVE THERMOSTAT |