AIR FUEL RATIO SENSOR (for Unleaded Gasoline Specification Vehicle) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE AIR FUEL RATIO SENSOR


    A112091

  1. Disconnect the sensor connector.

  1. Detach the 3 wire clamps.



    A112092

  1. Using SST, remove the sensor.

    SST
    09224-00010