VACUUM SWITCHING VALVE > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A110362

  1. Remove the 3 bolts, 2 nuts and cover.



3. REMOVE VACUUM SWITCHING VALVE BRACKET


    A110298

  1. Disconnect the 2 connectors.

  1. Disconnect the vacuum hoses from the 3 locations.

  1. Remove the 2 bolts and bracket.



4. REMOVE VACUUM SWITCHING VALVE (for EGR Cut)


A112098

  1. Remove the bolt and valve.