DIESEL THROTTLE BODY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.



2. REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY


A111789

  1. Disconnect the manifold absolute pressure sensor connector.

  1. Disconnect the vacuum hose from the gas filter.

  1. Loosen the 2 clamps.

  1. Remove the bolt and disconnect the pipe together with the 2 air hoses.



3. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    A111790

  1. Disconnect the 2 connectors.



    A111832

  1. Remove the 2 bolts, 2 nuts, throttle body and gasket.