DIESEL THROTTLE BODY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


A111785

  1. Remove the 3 bolts, 2 nuts and engine cover.



3. REMOVE CHARGE AIR COOLER ASSEMBLY WITH INTAKE AIR CONNECTOR


    A111786

  1. Disconnect the IAT sensor connector and manifold absolute diesel pressure sensor connector.

  1. Disconnect the vacuum hose from the manifold absolute pressure sensor.



    A111787

  1. Loosen the 2 clips.



    A112764

  1. Remove the 4 bolts and CAC.



4. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    A111790

  1. Disconnect the 2 connectors.



    A111832

  1. Remove the 2 bolts, 2 nuts, throttle body and gasket.