HORN SYSTEM > INSPECTION

for Preparation Click here



1. INSPECT FUSE (HORN)


B085921E01

  1. Measure the resistance of the HORN fuse.

    Standard resistance:
    Below 1 Ω

    If the result is not as specified, replace the fuse.



2. INSPECT HORN ASSEMBLY


B072265E01

  1. Apply battery voltage and check operation of the horn.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Horn bracket
    		Horn sounds

    If the result is not as specified, replace the horn assembly.