REAR BUMPER (for Flat Type) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE REAR BUMPER BAR


B085212E01

  1. Disconnect the 2 license plate light connectors.

  1. Detach the 4 clamps.



    B085210E01

  1. Remove the 4 bolts and bumper bar.



3. REMOVE REAR BUMPER ARM LH

  1. Remove the 2 bolts and bumper arm.



4. REMOVE REAR BUMPER ARM RH

  1. Remove the 2 bolts and bumper arm.