REAR PLANETARY GEAR > INSPECTION

for Preparation Click here



1. INSPECT NO. 2 ONE-WAY CLUTCH


AT08200E01

  1. Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race can be turned freely counterclockwise and locks when turned clockwise.



2. INSPECT PLANETARY PINION GEAR THRUST CLEARANCE


AT04459E01

  1. Using a feeler gauge, measure the thrust clearance.

    Standard clearance:
    0.20 to 0.60 mm (0.0079 to 0.0236 in.)

    Maximum clearance:
    0.65 mm (0.0256 in.)

    If the clearance is greater than the maximum, replace the planetary gear.



3. INSPECT NO. 2 ONE-WAY CLUTCH


AT08200E01

  1. Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race can be turned freely counterclockwise and locks when turned clockwise.