SPEED SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL O/D DIRECT CLUTCH SPEED SENSOR


G034531E01

  1. Coat a new O-ring with ATF and install it to the sensor.



    G034266E01

  1. Install the sensor with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.



2. INSTALL NO. 2 VEHICLE SPEED SENSOR


G034531E01

  1. Coat a new O-ring with ATF and install it to the sensor.



    G037867E01

  1. Install the sensor with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.