SECOND COAST BRAKE > DISASSEMBLY

for Preparation Click here



1. REMOVE 2ND COAST BRAKE PISTON OIL SEAL RING


AT05418E01


2. REMOVE 2ND COAST BRAKE PISTON ROD


AT05260E01

  1. Firmly hold down the piston, and then compress the compression spring.

  1. Remove the E-ring.



    D001299E01

  1. Remove the spring, washer plate and piston rod.



3. INSPECT 2ND COAST BRAKE BAND


D025701E01

NOTICE:
  1. If the lining of the brake band is peeled off or discolored, or if any part of the printed numbers are damaged, replace the brake band.
  2. Before assembling the new band, soak it in ATF for at least 15 minutes.